Palpeur pour machines CNC | ProTouch – Amastone

Name: Palpeur pour machines CNC | ProTouch - Amastone
SKU: SRT3DT-K
Availability: InStock
Rating: 5.00 (2 reviews)

Note 5.00 sur 5

5.0

This probe has a simple normally closed (NC) contact that opens when the probe is touched, rendering probe compatible with any CN board or inlet.

Stem

Ø4 mm ruby ball

Ø2 mm ruby ball

Without stem

299,00 € H.T.

7 en stock

UGS : SRT3DT-K Catégorie : Dispositifs de Mesure et de Contrôle

Specification

Marque	Amastone
Contact type	NC (Normally closed)
Montage Outil	Cylindrique 7 mm
Pour	CNC

Description

Palpeur à contact pour CNC | ProTouch – Amastone

Le palpeur Amastone est une sonde mécanique offrant un excellent compromis entre prix et qualité.
Il s’agit d’une sonde passive qui ne nécessite pas d’alimentation et qui est caractérisée par une sphère de contact de 4 mm.
En général, le palpeur est utilisé sur les centres d’usinage CNC et les tours CNC pour diverses fonctionnalités. Par exemple, en fonction des fonctionnalités de votre machine CNC, vous pouvez utiliser le palpeur pour détecter rapidement la position de la pièce avant l’usinage, pour acquérir la planéité d’une surface à travailler, ou pour la copie (numérisation) d’une pièce en 3D, comme un bas-relief.

Applications et avantages du palpeur :

Acquisition rapide du zéro pièce
Acquisition de la planéité de la surface à travailler
Numérisation / copie d’une pièce
Précision maximale de mesure dans toutes les directions de palpage
Élimination des erreurs liées aux réglages manuels
Contrôle de la qualité de l’usinage
Tension du câble de signal : 3-48 V

Le palpeur Amastone est entièrement en aluminium anodisé et en acier inoxydable.
Le degré de protection est IP64, il est donc totalement protégé contre les poussières et les éclaboussures d’eau provenant de n’importe quelle direction.
Contrairement aux palpeurs bon marché destinés à un usage amateur, ce palpeur permet un calibrage mécanique afin que son axe s’aligne parfaitement avec l’axe de la broche. Pour effectuer cet alignement, il y a 4 vis à six pans opposées.

Serrage

Le palpeur Amastone a une tige d’attache de diamètre 7 mm et longue de 20 mm. Pour sa fixation, une pince élastique ER avec un trou de 7 mm peut être utilisée.

Connexion

La connexion électrique comprend un câble à deux fils, l’un pour le signal et l’autre pour la mise à la terre. Il s’agit d’un simple interrupteur à “contacts normalement fermés”. Lorsque le palpeur entre en contact, les contacts s’ouvrent. Lorsque les contacts sont fermés, la résistance est de 10-30 Ω. Le signal est isolé du corps de l’instrument.

Caractéristiques techniques du palpeur Amastone

Directions de palpage:

±X; ±Y; -Z

Force de déclenchement:

XY = 1N; Z = 5N

Répétabilité (unidirectionnelle):

2 μm

Fonction de sortie :

Commutateur électronique à haute vitesse avec contact normalement fermé

Longueur du câble :

3 Meters (avec connecteur)

Boîtier:

Aluminium et acier inoxydable

Montage:

Cylindrique 7 mm
Longueur: 20 mm

Taille sans tige:

Diamètre: 40 mm
Hauteur: 38.5 mm

Taille de la tige:

Diamètre: 2.5 mm
Hauteur: 31 mm

Diamètre de la sphère en rubis:

Diamètre: 4 mm

Avis (2)

2 avis pour Palpeur pour machines CNC | ProTouch – Amastone

Luben Hristov (client confirmé) – septembre 22, 2022

Note 5 sur 5
Very well made to the highest standards touch probe. Recommend it
(client confirmé) – mars 5, 2019

Note 5 sur 5
The probe works realy well and the finish and quality is also very nice.
had no time to test the accuracy yet but did use it already and seams to be good.

the only thing that i miss is a manual how to adjust the probe center it’s not difficult but it would have been nice if they had supplied one.

Ajouter un Avis

Demander des informations

Do you have touchprobe that works with haidenhain tnc 2500 (bridgeport interact 4). Thanks.

0 votes

Q Do you have touchprobe that works with haidenhain tnc 2500 (bridgeport interact 4). Thanks. answer now
Asked by JJ Lynn

Answered by the admin
hello Lynn,
check if you have a free input pin on your controller to connect the touch probe.
You need also software to acquire the points and this depends on your machine also.*The touch probe is only a tool and the machine has to be configured to use a touch probe.
Check the wiring specs:

The internal electrical connection resembles a simple switch with normally connected contacts having a resistance of 10-30 Ω when closed. After the stylus is actuated, the contacts disconnect. The signal is isolated from the instrument body. The cable has two wires, one the signal wire, the other ground.

Can this touch probe unit be ordered pre-calibrated with certificate? Also, can I have the 3D file emailed to me as well for consideration in my application?

0 votes

Q Can this touch probe unit be ordered pre-calibrated with certificate? Also, can I have the 3D file emailed to me as well for consideration in my application? answer now
Asked by Steven Blake

Answered by the admin
Hi,
you can calibrate with the screws on the body, we give it with the probe dismantled, and we don't have the calibration certificate.
Yes, we have the 3D file I can send it via mail.

Good afternoon, what's the eccentricity error of the touch probe? Can I use a commercial stylus? Thank you in adavnce.

0 votes

Q Good afternoon, what's the eccentricity error of the touch probe? Can I use a commercial stylus? Thank you in adavnce. answer now
Asked by Nils Fredrik Ciancio

Answered by the admin
Hi Nils,
Eccentricity error is as good as you can calibrate it, but repeatability is ~2µm. Sure, you can use any off the shelf stylus with M3 thread.

What is the thread size of the stylus? | Is it possible to get the touch probe delivered in the same length but with a 3 mm ball tip? Thanks!

0 votes

Q What is the thread size of the stylus? | Is it possible to get the touch probe delivered in the same length but with a 3 mm ball tip? Thanks! answer now
Asked by Levin Thome

Answered by the admin
Hello Levin
Stylus thread is M3. Have only 4mm and 2mm ball stylus.
write in the "note" at the checkout the ball stylus that you need.
We can ship it at the end of next week.

Is there a CAD model of the touch probe available ? Thanks in advance!

0 votes

Q Is there a CAD model of the touch probe available ? Thanks in advance! answer now
Asked by Paul Grosser

Answered by the admin
hello paul, let me get it and I send you the 3D drawing of this touch probe via email

do you have software to measure the surface and then to cross measure map with dxf file..? I use in mach3 and artcam thanks

0 votes

Q do you have software to measure the surface and then to cross measure map with dxf file..? I use in mach3 and artcam thanks answer now
Asked by maor

Answered by the admin
Hello Maor,
no, we don't have any software to measure the surface with mach3 controller.
Anyway if you find it likely our touch probe will be compatible with that controller and software.
If you find it let me know it, it could be very useful for other cnc operators

Good morning am currently looking for a new probe touch probe 3d measuring sensor so i can digitize a surface my previous probe couldn't handle rapid commands with .002" stepover while digitizing ..i think it has to do with the jerking motion from the machine. how well can this probe handle .. and if i buy this probe and turns out it does the same can it be returned

0 votes

Q Good morning am currently looking for a new probe touch probe 3d measuring sensor so i can digitize a surface my previous probe couldn't handle rapid commands with .002" stepover while digitizing ..i think it has to do with the jerking motion from the machine. how well can this probe handle .. and if i buy this probe and turns out it does the same can it be returned
Asked by Salvador Gomez

There are no answers for this question yet. Answer now

would this probe work in an oil cooled cabinet?

0 votes

Q would this probe work in an oil cooled cabinet? answer now
Asked by Gavin Williams

Answered by the admin No, you cannot use it in an oil cooled cabinet. These touch probes can only be used under dry conditions.